Available sizes:

• Ø150 x 25 mm
• Ø180 x 25 mm

The selection of polishing pads for polishing compounds and polishing machines depends on several factors, including the surface type, the condition of the surface and the desired polishing effect. Here are some basic guidelines:

Polishing sponges

1. Sponge – soft - black
• Use: For fine general polishes, finishing polishes, waxes or sealants.
• Properties: Less aggressive, especially good for sensitive surfaces
2. Sponge – medium - blue
• Use: General polishing, light scratch removal.
• Features: Good all-round performance, offers a good balance between speed and protection
3. Sponge - hard - orange
• Use: Removal of deeper scratches, heavy polishing work.
• Properties: Aggressive, for heavily used surfaces, enables effective removal of defects

Rotation recommendations:

The optimal speed depends on the type of surface, the polishing agent and the sponge. In general:

• Low revolutions (approx. 600-1200 rpm):
• For wax, sealants or fine polishes.
• Prevents overheating of the surface and allows even distribution of the product.
• Medium revolutions (approx. 1200-1800 rpm):
• For general polishing and light scratch removal.
• Offers a good combination of effectiveness and control.
• High revolutions (approx. 1800-2500+ rpm):
• For heavy polishing work, deep scratch removal.
• Be sure to guide the machine evenly to avoid overheating and surface damage.

Tip: It is important to always start at a low speed and increase if necessary to minimize surface damage. It is also advisable to pay attention to the polishing machine manufacturers' instructions.