Couldn't load pickup availability
for endless creative applications in the field of epoxy resin art
Solvent-free, UV-resistant and transparent epoxy resins of the highest quality
Very good chemical and thermal resistance. Low viscosity with self-venting properties and high gloss level
20 system: Maximum casting height of 20mm
Processing time: 120 minutes
50 system: Maximum casting height of 50mm
Processing time: 240 minutes
CreativeEpoxy is easy to use. It requires no special equipment and degasses during curing.
This results in an absolutely clear and bubble-free casting. It can be produced in a single casting in layer thicknesses of up to 50 mm.
50 system (20 system up to 20 mm) without overheating, distortion or discoloration.
In order to produce castings in unlimited thicknesses, additional layers can be added after the previous layer has hardened.
in the respective maximum layer thicknesses. For a special color experience, CreativEpoxy has various pigments available for you.
The CreativEpoxy pigments and color powder can be mixed together in the resin.
To determine how much CreativEpoxy needs to cover the specific surface, please refer to the table below.
Formula for calculating the amount of material:
Length x width (cm)/10000 = material quantity in kg (for 1mm layer thickness)
Health and safety information
Information and advice on the safe handling, storage and disposal of chemical products
Users can find the latest Safety Data Sheet (SDS), which contains physical, ecological, toxicological and other safety-related data.
Always wear protective gloves and glasses!
If you have any further questions, please send us an email or call us at:
20 system: Maximum casting height of 20 mm
Processing time: 120 minutes
50 system: Maximum casting height of 50 mm
Processing time: 240 minutes
To determine how much CreativEpoxy needs to cover the specific surface, please refer to the table below.
Formula for calculating the amount of material:
Length x width x height (cm) / 1000 = material quantity in KG
Problem: The CreativEpoxy systems should be stored at temperatures between 10°C and 30°C. If the temperature is too cold, the A component may crystallize, which can lead to a milky appearance. In rare cases, the resin may also change from a liquid to a solid state.
Solution : Warm up the material in a closed container (approx. 40-50 degrees), e.g. in a water bath or oven. The material will become liquid or clear again. There is no need to worry about any reduction in quality!
The components should be mixed very thoroughly!
Pouring the mixture into a new, clean container and mixing again also reduces possible problems during curing.
Problem: During the curing time, ensure that the temperature and humidity (including air humidity) remain constant and protect! Excessive air humidity during curing can lead to a milky surface or a white film. The air humidity should be between 30 - 70%. Approx. 24 hours at 23 C°, sandable after approx. 48 hours, complete curing after 7 days.
Solution: Pour a new layer of resin or polish the surface.
Full curing is achieved after 7 days. We do not recommend sanding or polishing beforehand.
Tools can be cleaned with acetone or nitro thinner.
Take a silicone mold of your choice and make coasters in all imaginable colors and shapes! Use metallic colors for the beautiful glitter effect.
No matter how big, with CreativEpoxy resin and colors your next big project will be a success. We offer everything you need for your river table!
Let your creativity run wild and think of new, limitless applications. Watches, jewelry, furniture, etc. are no problem!
Coat your wooden discs with our epoxy resin and create unique works of art. All you need is wood, resin, paints and patience!
Since 2018, your expert in epoxy resin!
